Shop Categories

Product Details

 Arduino Nano V3.0 AVR ATMEGA328 development board
Arduino Nano V3.0 AVR ATMEGA328 development board
MPN :
SKU : ARDN2-C262F12A
Stock : 85pcs
Price:PKR 1100.00
Package include: Arduino Nano atmega328 board without USB cable.

The Arduino Nano is very similar in performance or pin count to the Arduino UNO version, but the Nano is far more compact. It is excellent for projects where there is only a small space available, the pins on the board are not powered.

To use it, you must download the Arduino IDE from the official Arduino website. Some operating systems may not recognize the board when connected to a computer, in which case you will need to install driver CH340G.

We also include in the offer Arduino Nano with powered pins. Compared to the classic Arduino Nano, it has a built-in micro USB connector.

Arduino Nano is a surface mount breadboard embedded version with integrated USB. It is a smallest, complete, and breadboard friendly. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper. Physically, it is missing power jack. The Nano is automatically sense and switch to the higher potential source of power, there is no need for the power select jumper.

Nano’s got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It’s got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). This new version 3.0 comes with ATMEGA328 which offer more programming and data memory space. It is two layers. That make it easier to hack and more affordable.

You end up paying less with Nano than Mini and USB combined!

Specifications:
Microcontroller  Atmel ATmega328
Operating Voltage (logic level)  5 V
Input Voltage (recommended)  7-12 V
Input Voltage (limits)  6-20 V
Digital I/O Pins  14 (of which 6 provide PWM output)
Analog Input Pins  8
DC Current per I/O Pin  40 mA
Flash Memory  32 KB (of which 2KB used by bootloader)
SRAM  2 KB
EEPROM  1 KB
Clock Speed  16 MHz
Dimensions  0.70” x 1.70”

Features:
• Automatic reset during program download
• Power OK blue LED
• Green (TX), red (RX) and orange (L) LED
• Auto sensing/switching power input
• Small Micro USB for programming and serial monitor
• ICSP header for direct program download
• Standard 0.1” spacing DIP (breadboard friendly)
• Manual reset switch

Power:
The Arduino Nano can be powered via the Micro USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
  • Google Checkout
  • Master Card
  • Paypal
  • Acc
  • Acc2
  • Visa

Copyright © 2014, All rights reserved.