See this product in video click on the following link: https://youtu.be/OQBqKGh_bDs

Raspberry Pi 4/3 Model B Fisheyes IR Camera Night Vision 160 Degree 5MP Wide Angle with Infrared 2 LED Lights Module
Raspberry Pi 3 Model B+ Fisheyes Camera 160 Degree 5M Pixel Wide Angle Night Vision Camera + Infrared 2 LED Lights Camera Module for RPi 3B Plus
Item Description:
This is the new camera for Raspberry Pi for the peopel need more wide angle. It is night vision , focal adjustable camera.


Item Specification:
5 megapixel OV5647 sensor
CCD size : 1/4inch
Sensor best resolution : 1080p
4 screw holes: used for attachment IR lights , and for 3.3V electric conduction
Focal Length : 2.1
Diagonal angle : 130 / 160 / 220 degree
Dimension: 25mm x 24mm


Features:
Fish eye wide angle lens , 160 degree
Night vision camera
5 MP pixel
Focal adjustable


Packing List:
Fish Eye Night Vision Camera  x 1
Infrared LED Lights x 2
15 cm Camera Cable  x 1


How to use Raspberry Pi Camera
1. Install Raspbian system into SD card and insert to Raspberry Pi, connect the display to Raspberry Pi, Connect the camera to Raspberry Pi correctly.
2. Open the terminal and run
sudo raspi-config
3. Choose the Interface--Enable Camera , enter it , then it the Raspberry Pi will restart automatically ( if not , you can restart it by yourself)
Open the terminal again , run
raspistill –t 5000 –o test.jpg
then the camera will be on.The “5000”means the camera will open 5 seconds , the “test” is the name of picture , you can change them as your need.