MY1016Z 250W 24V DC Brushed Gear Motor 400RPM EV ebike electric motor


This popular reduction motor is simply the most commonly used motor for Scooters, Bikes and quad's available in the market!


It is normally found in the better quality quads and scooters on the market and is classed as a mid range combination. 
The low range (usually in the cheap kiddie carts) unit is generally a Johnson or Mabuchi 550 motor hooked together to a plastic toy gearbox (pretty poor quality).
Most people use this 250W motor as a starting block for building their own carts. 
These use a common mounting block which makes replacement of a worn or broken motor a painless swap over.


They are quite powerful for their small size and extremely reliable. We've sold these for so many different applications that they were never designed for, but the robustness of the build makes them just go and go and go etc!
You wont find these in the cheap kiddie carts, but you will on the higher quality models!


Specifications:
MY1016Z
24 Volt DC Operation
Permanent Magnet DC Motor
No Load RPM: 3850 (After Gearbox reduction 400RPM)
No Load Current: <2.2 Amps
Rated Wattage: 250W (0.33 Horsepower)
Rated Load RPM: 3000 (After Gearbox reduction 400RPM)
Torque (NM): 0.80
Rated Current: 13.4 Amps
Efficiency: 78%
Reduction Ratio: 9.78:1
Direct Drive (No Free Spooling)
Suitable for Forward and Reverse Operations
Base Mount Model
9 Tooth Sprocket for 1/2" x 1/8" Pitch Chain


This motor is capable of rotation in either clockwise or counter clockwise by reversing the motor's power wires.